View Single Post
jsveb jsveb is offline
Registered User
jsveb's Avatar
Join Date: May 2007
Location: Norseman territory
Posts: 2,780
may have found the culprit

Guys After travelling on the job, I am back and picked up on the troubleshooting.

JBL930, I think (really hope) you are spot on with your suggestion.

I went out and took off the new IGN cap (just installed during this latest "endevour") I grapped the rotor (also new)and gently tried to moved it. Then with a pronounced click/clonk it moved. Now I can move it some. I guess it was stuck. As far as I remember it jumped counter clockwise, does this mean it was stuck in a retarded position?

On a side note. I could see some scrabing on the old cap from the rotor. I guess this means the bearing in the IGN is worn as well.

I think this may mean that I have to get the DIST rebuilt no matter what.

Thank you
Carrera 3.0 1975
930 1978 OEM Matte Schwartz, ANDIAL IC, BL WUR, SC cams. LMA-3 w. XD-16 and CP transducer
Old 06-18-2011, 10:01 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #29 (permalink)