View Single Post
Roby466 Roby466 is offline
Registered User
 
Roby466's Avatar
 
Join Date: Sep 2009
Location: Halifax, Canada
Posts: 629
Garage
If you use a 1/4 in ratchet or a 10mm wrench, it should be tight enough without going at it like crazy. I would not recommend using a 3/8 ratchet because the leverage might make it too easy to overtorque them. I can check my book for spec tonight when I get back from work but chances are that your torque wrench will not fit in there anyway. I used blue locktite and made sure they were tight but not crazy tight... (kind of hard to explain) Actually, if you go online and follow the typical torque guide for different size bolts, it should work.
__________________
David
1985 Black 930, K27 7006, Garretson Intercooler, Adj boost, TB: 23 - 31mm, bielstein sport shocks, ER polybronze bushings front and rear, ER monoball joints front and rear with offset camber plates, 935 X triangulated strut brace, raised spindles, racing bump steer kit
1981 Black 911sc (sold)

Last edited by Roby466; 06-20-2011 at 12:56 PM..
Old 06-20-2011, 12:30 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #5 (permalink)