View Single Post
mooney265 mooney265 is offline
Tinkering Pays!!
mooney265's Avatar
Join Date: Sep 2008
Location: New Orleans
Posts: 1,365
Ok, so here's where I'm at:

This boost switch adjusted to "open" at 3 or 4 psi boost:
Coolingmist Boost Pressure Switch - Modern Automotive Performance

After the switch, a relay with "delay back to on" set at about 10-15 seconds:
Automotive Time-Delay Relay

But would use the TRD-PO on this page:
TDR-O: Normally On Time-Delay Relay

From there, on to the Compressor Clutch wire...

What say you? Thanks,
LIVN80S - - Red '79 Porsche 930 Steel Slant Nose Conversion [in 1987] w. 46k miles 3.3L; 964 Cams; K27HF @ 1.0 BAR, with Garrettson Intercooler; Rarly Zork; CIS Flowtech Fuel Head & BL-WUR.

Last edited by mooney265; 06-23-2011 at 07:01 PM..
Old 06-23-2011, 03:21 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)