View Single Post
cole930 cole930 is offline
Registered User
 
Join Date: Mar 2000
Location: Auburn,In. U.S.A.
Posts: 2,449
Jesper,

It isn't time to go jump off a bridge yet.

1 & 4 are low but I have seen much worse. Squirt some oil into those two cylinders and turn the engine several times and check those two again, see it that makes any difference. Then pull the upper rocker covers and turn it over and wiggle the rockers anc check for broken or damaged rockers, look at the cam lobes under each rocker to see if there is any gaulding, gouges,or excessive wear. Now run through the firing order checking the valve lash on each cylinder to see if any are exceptionally tight or exceptionally loose. Let us know what you find or see out of the ordinary.

Cole
__________________
Cole - 80 930 "The Old Sled"
Mods: TurboKraft Custom IC, 934 Headers, GSX 61, Zork, Port Work, SC Cams, Air Mod Fuel Dist Relocated, Water Meth Injection, BL WUR, MSD 6530, Greddy EBC, Synapse Bov, Short 2nd & 3rd with 8:37 R&P, Wevo Shifter, Coupling, and Mounts, MTX-L SSI-4, Big Brakes, Rebel Coilovers, Bilstein Sports.
Old 06-24-2011, 06:15 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #51 (permalink)