View Single Post
mooney265 mooney265 is offline
Tinkering Pays!!
 
mooney265's Avatar
 
Join Date: Sep 2008
Location: New Orleans
Posts: 1,365
Garage
Because I removed the AAV, my idle tends to be a little low on initial startup - maybe 300 rpm's. but, it will idle without me adding any pedal. as the car warms fully up, the idle goes to about 1,050 [without the A/C]. i believe it drops to about 900 with the A/C.

My point being - - i have the idle adjustment screw turned all the way in, and the lowest i can get my idle is 1,050 when fully warmed... I'm sure I have a small vacuum leak somewhere, but have not been able to track it down...

I think it was JFairman that posted a while back a device that he hooked to the rubber 90* elbow right after the FD. It basically plugged the elbow along with injecting compressed air downstream... I tried to pull this off, but didn't have any luck. Maybe I'll try again - - I'd like to get my idle down to say 900...
__________________
LIVN80S - - Red '79 Porsche 930 Steel Slant Nose Conversion [in 1987] w. 46k miles 3.3L; 964 Cams; K27HF @ 1.0 BAR, with Garrettson Intercooler; Rarly Zork; CIS Flowtech Fuel Head & BL-WUR.
Old 06-26-2011, 05:16 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #15 (permalink)