View Single Post
Alan L Alan L is offline
Registered User
 
Alan L's Avatar
 
Join Date: Apr 2006
Location: New Zealand
Posts: 3,185
What kind of backlash - you should have some rotational movement on the rotor (10-15deg) holding the drive shaft firm.
Something you could try - suck/blow on the vac/boost port. Not sure if you can register enough huff - but theoretically it should rotate the rotor. Theer is a diaphragm connected to the port which has a linkage arm to the adv/retard mechnism from memory. It should be able to move freely.
Alan
__________________
83 SC, 82 930 (track) - Stock except for RarlyL8 race headers, RarlyL8 Zork, K27-7006, 22/28 T bars, 007 Fuel head, short 3&4 gears, NGK AFR, Greddy EBC (on the slippery slope), Wevo engine mounts, ERP rear camber adjust and mono balls, Tarret front monoball camber adjust, Elgin cams, 38mm ported heads, 964 IC. 380rwhp @ 0.8bar Apart from above, bone stock:-)
Old 06-30-2011, 10:05 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #72 (permalink)