Thread: ignition help
View Single Post
tops911 tops911 is offline
Registered User
 
tops911's Avatar
 
Join Date: Feb 2002
Location: Montana
Posts: 560
I tested the CIS today and got the following readings: 88 PSI or 6 BAR with the valve closed (the valve on the gauge set) which should be the system pressure and 38 PSI or 2.6 BAR with the valve open this was at 85 degrees, cold pressure. These readings seem in spec and should not cause running problems, I think anyway.......
I'll test the flow volume next.
Oh and I tested the resistance in plug wires. The one wire I kept using to check for spark was bad....... figures. I do have some new plug wires on the way. I also put in a new set of plugs.
__________________
1982 930, K-27, BL adj. WUR, Rarlyl8 Headers and Hooligan muffler, MSD 6, 22 and 30mm torsion bars, poly bronze bushings 30mm raised spindles and custom valved Bilstein shocks (by Elephant Racing), monoballs front and rear (by Rennline), Alton 17" Fuchs, Fred Cook fuse panel
Old 07-05-2011, 07:13 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #25 (permalink)