View Single Post
flatsix965 flatsix965 is offline
Registered User
 
flatsix965's Avatar
 
Join Date: Apr 2011
Posts: 11
Garage
'86 930 Starter ring gear dimensions help!!

While trying to install a new starter ring gear and pressure plate on my 1986 I found that the ring wonít fit on the on the pressure plate. The ID of the ring is about 232mm vs the pressure plate 235mm OD (about 3mm interference). I not planning to replace any of the two and I bought them many months ago so return is not an option. I need to decide which one I will send to the machine shop but I need to determine which one is wrong. Does any one know the right ID for the ring or OD for the pressure plate (where the ring sits)?
I donít have the original parts to make the measurements. I donít want to modify the ring if it correct (and the part # is the right one 930-116-230.02).
Any help will be greatly appreciated.
Thanks!!
Joe


Old 07-10-2011, 08:51 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)