View Single Post
CFD CFD is offline
Registered User
Join Date: Aug 2010
Location: Ireland
Posts: 114
Originally Posted by Flat6pac View Post
This is a 76/77 PP and the larger is a 78 and later.

Excellent Bruce - I will compare those measurements. Thanks - much appreciated.

I have the original clutch disk back in the car and put the engine/gearbox back in today - trying to rectify another problem - excessive oil leaks from what seems to the flange seals, despite having fitted two new seals and pushed them 1mm further into the box to ensure the seal is wiping on part of the flange that is not pitted/corroded. After a 7 mile test drive today I have such an amount of oil dripping from the box its difficult to believe its just coming out through the seals - its a strange one. The gearbox breather is perfectly clear too, so this one is also puzzling me.

I see from you signature you also have a '76 930. Very nice car you have there!!
Is it in original condition?
'76 911 Turbo
Old 07-16-2011, 01:45 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #6 (permalink)