View Single Post
red-beard red-beard is offline
canna change law physics
 
red-beard's Avatar
 
Join Date: Jul 2000
Location: Houston, Tejas
Posts: 38,512
Garage
You can use both together. Are your springs really weak? Is your lockout plate really damaged? Most of the time, all you need to do is adjust the shift linkage.

I have not seen the short shift kit, but the stock shifter has a couple of internal bushing which wear out and create tremendous amount of slop, which is most noticable when you are in gear and can still move the shifter significantly from side to side. If the short shift kits replaces these with new ones or get rid of them, it may be the reason a short shift kits helps sloppy shifting.

To replace the bushings and the spring for the standard shifter is about $45 but are available only from a Porsche dealer.

At the end of my tranny article, I show you how to adjust the linkage and also list the shift selector bushing and spring parts.

http://home.san.rr.com/pb914/rebuild/

Both sides of the lockout plate should be straight (well, except for the obvious notch at the end).

James
__________________
James
The pessimist complains about the wind; the optimist expects it to change; the engineer adjusts the sails.- William Arthur Ward (1921-1994)
Red-beard for President, 2020
Old 12-04-2002, 07:48 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)