View Single Post
cole930 cole930 is offline
Registered User
Join Date: Mar 2000
Location: Auburn,In. U.S.A.
Posts: 2,449
Well we've sourced and received some of the bits we needed to proceed and the wastegate pipe, it had Brian and I both scratching our heads. I'll be taking it out to Aloe's tomorrow to get it welded up.

Started to install the fuel distributor and had to change the angle on the oil filler neck to make a little room.

Correctly located where the Turbo intake pipe will come up.

Fabricating a proper perch for the CIS so it sits level and will be easily removable
and set out of the way for valve adjustment without having to remove any of the fuel lines.

Had to make some supports with vibration mounts for the CIS.

Fits good, sits level, good clearance for everything else, and can get at the oil filter.

Lines up with the Turbo pipe all we need is a coupler and another elbow.

A little paint and button things up and we will be building fuel lines !!!!!!

Cole - 80 930 "The Old Sled"
Mods: TurboKraft Custom IC, 934 Headers, GSX 61, Zork, Port Work, SC Cams, Air Mod Fuel Dist Relocated, Water Meth Injection, BL WUR, MSD 6530, Greddy EBC, Synapse Bov, Short 2nd & 3rd with 8:37 R&P, Wevo Shifter, Coupling, and Mounts, MTX-L SSI-4, Big Brakes, Rebel Coilovers, Bilstein Sports.

Last edited by cole930; 08-07-2011 at 02:14 PM..
Old 08-07-2011, 02:03 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #94 (permalink)