View Single Post
TurboKraft TurboKraft is offline
Registered User
 
TurboKraft's Avatar
 
Join Date: Mar 2005
Location: Phoenix, AZ
Posts: 2,534
Pelican Parts Oil tank ports

In the photo above, left to right, the fittings on the tank are:
- large hose with crimped end, hex nut = return from external thermostat
- small hex fitting with hose clamped on = drain hose from air/oil separator
- hex fitting (marked in photo) = scavenge pump return line
- large clamp on - "S" hose supplying oil to engine

The tank fitting for the air/oil separator drain hose can be 2 different sizes. Some years it was a smaller thread size (M18x1.5) and in later years it was very large, maybe 24mm or 26mm.
__________________
Chris Carroll
TurboKraft, Inc.
Tel. 480.969.0911
email: info@turbokraft.com
http://www.facebook.com/TurboKraft - http://www.instagram.com/TurboKraft
Old 09-11-2011, 08:04 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #33 (permalink)