View Single Post
RarlyL8 RarlyL8 is offline
Crotchety Old Bastard
RarlyL8's Avatar
Join Date: Jan 2000
Location: Huntsville, AL
Posts: 13,523
The OEM vent line goes to the air breather box. I guarantee you'll have oil all over your engine if you do that now. There is a problem that needs fixed.
There is a fitting on the lower right of your can that is used to drain the oil or attach to the engine sump if desired. This is an option but doesn't cure the problem.
Pull the braided line and put it in a bucket of oil with know quantity and measure uptake. Another measuring device can measure output from the turbo/can. The unbalance will tell you which end is malfunctioning; too much output or not enough suction.
RarlyL8 Motorsports / M&K Exhaust - 911/930 Exhaust Systems, Turbos, TiAL, CIS Mods/Rebuilds
'78 911SC Widebody, 930 engine, 915 Tranny, K27, SC Cams, RL8 Headers & GT3 Muffler. 350whp @ 0.75bar
Brian B. (256)536-9977 Service@MKExhaust Brian@RarlyL8
Old 11-01-2011, 03:38 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #8 (permalink)