View Single Post
Alan L Alan L is offline
Registered User
 
Alan L's Avatar
 
Join Date: Apr 2006
Location: New Zealand
Posts: 3,249
Well, I don't think it is valve timing. I got 0.85mm on that side - fractionally beyond spec of 0.80. I doubt 0.05mm would do it - your valve clearance tolerances probably put it beyond that sort of variance on a regular basis I would guess.
It was certainly worth a crack with one side looking suspect.
I can but check the plugs next WOT run. Which won't be for a little while.
Weird.
Alan
__________________
83 SC, 82 930 (track) - Stock except for RarlyL8 race headers, RarlyL8 Zork, K27-7006, 22/28 T bars, 007 Fuel head, short 3&4 gears, NGK AFR, Greddy EBC (on the slippery slope), Wevo engine mounts, ERP rear camber adjust and mono balls, Tarret front monoball camber adjust, Elgin cams, 38mm ported heads, 964 IC. 380rwhp @ 0.8bar Apart from above, bone stock:-)
Old 11-17-2011, 06:11 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #17 (permalink)