View Single Post
JFairman JFairman is offline
Registered User
 
Join Date: Jul 2006
Location: S. Florida
Posts: 7,128
Some people have cut a slot into the top of the cast aluminum brake line mount thats cast into the top side of the trailing arm so after removing the spring clip you can lift the hard line out without undoing it.

At the same time the brake fluid should be flushed out so why bother... just undo it and let gravity run the old fluid out. Then remove the brake fluid resovoir, wash it in water (brake fluid is water soluable), dry it completely with comprerssed air, replace it and the brake fluid and bleed it slowly to keep from breaking up any air bubbles into smaller harder to get rid of air bubbles as usual.
Old 12-14-2011, 11:54 AM
  Pelican Parts Technical Article Directory    Reply With Quote #102 (permalink)