View Single Post
mark houghton mark houghton is offline
mark houghton's Avatar
Join Date: Jul 2008
Location: Central Washington State
Posts: 3,893
Originally Posted by quattrorunner View Post
OK, I'll benchtest tonight as well as look again at that diaphragm in light to see anything out of right. Should I use some sort of lube for the diaphragm? My gate doesn't have an o ring seal in it should it?
I don't recall there being any O rings in the WG. The lip of the diaphram must seat squarely into the groove in the housing so take care when you put the bell back on that it doesn't pop out of the groove, causing a poor seal or damaging it. When you get her apart, make sure the valve isn't corroded and stuck closed for some reason.
Mark H. 1987 930, GP White, Wevo shifter, Borla exhaust, stock everything else. The result of a massive Pelicanite good will fire recovery effort. Truely an open book, ready for the slippery slopes to modification.
Old 02-01-2012, 09:14 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #25 (permalink)