View Single Post
mike mueller mike mueller is offline
Registered User
 
mike mueller's Avatar
 
Join Date: Nov 1998
Location: antioch, ca, usa
Posts: 1,082
Even tho I'm selling the needle bearing kit I'll still chime here and give you some honest advice since I understand the price factor is pretty stiff.....

Go with the "street" compound poly bushings that Pelican sells...just make sure the fit is not too tight on the a-arms and if doing the rear trailing arms, the shaft internal to the trailing arm.

Cut grooves on the inside of the bushing (I've used a Dremel in the past with a ball end grinder) Lube the daylights out of them with the poly grease that comes in the little yellow container.

Mike Mueller
914club.com
Old 01-13-2003, 08:51 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)