View Single Post
perelet perelet is offline
Oleg Perelet
 
Join Date: Jul 2010
Location: Escondido, CA
Posts: 181
Garage
Quote:
Originally Posted by Vandit View Post
Is there any way to tighten the nut for the return line on the engine w/o removing the heat exchangers?
Not with tool set that I have. But even if you tighten nut up - line WILL LEAK from that flex joint. Replacing line is not that bad - took me one day with saw cutting etc. Besides new line you'll need exhaust nuts and 6 exhaust gaskets, also ordering few extra exhaust studs is good idea. If you just removed your mufflers few weeks ago - no need for other gaskets.


Quote:
Originally Posted by Vandit View Post
Another question, after reassembly, that hardline portion of the return line near the oil filter is pretty much making contact w/ the primary exhaust pipe where it connects to the secondary, or in my case, G pipe.

You can see it here. On mine, the line and the exhaust touch.
I have stock muffler, distance from return line to muffler pipe in closest place is about 1in

Oleg.
Old 03-04-2012, 06:50 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #24 (permalink)