View Single Post
TimT TimT is offline
what? me worry?
TimT's Avatar
Join Date: Mar 2002
Location: Wantagh, NY
Posts: 7,403
Setting the cold start tables is one of the most difficult things to accomplish when tuning a EFI install, since you only have a few tries a day to make adjustments.

Another problem here is that we are trying to compare maps from different manufacturers it is a multi-variable mix of apples,oranges, peaches and durian.

Some systems uses TOG (Time on Gamma) or injector pulse width in milli seconds... and a decay function for warm up enrichment..Others have tables with temps and percentages, other have tables with number that don't make much sense..

Someone posted a set of tables that are 8 bit values for percentages...

0-255 = 0-100% in 8 bit speak.

Here are some tables that give conversions for 8 bit to %

8bit-percent value conversion

I find that its easier for me to deal with pulse width, and a temp value decay when tuning cold starts/warm up..
who are those guys? <<< ( Butch Cassidy and the Sundance Kid)
Rent a GT3RS from us!! Call or e-mail.
Transportation and Track support
Rudtners Racing

'69 911 GT-5
'75 914 GT-3
Authorised Haltech seller and installer
Authorised Unichip installer
BBS wheels
Fikse wheels
Redline motors oils
1500 hp chassis dyno

Last edited by TimT; 04-24-2012 at 06:52 PM..
Old 04-24-2012, 06:50 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #22 (permalink)