View Single Post
GJF GJF is offline
Slantnose from HELL
GJF's Avatar
Join Date: Dec 2004
Posts: 860
BOV are only to protect the thrust bearings and to help faster boost recovery between shifts. And you don't divide banks from one another . The BOV many times is placed after the IC which does nothing that it is intended to do other than make RICER sounds. They need to be placed as close to the compresser as close as possible to work properly. One waste gate could be used but there is no synchronization between turbos or waste gates it all just combines to the intake. If the wastegate isnt sized properly and or the routing of the exhaust to the wastegate isnt fabricated in a efficient manner boost control WILL be a problem.
Old 06-06-2012, 07:26 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #9 (permalink)