View Single Post
Dublinoh Dublinoh is offline
Registered User
Dublinoh's Avatar
Join Date: Nov 2011
Location: Central Ohio
Posts: 784
I installed the "sold by Pelican" version. The sending unit may need the holes opened slightly to seat on the tank, easy to do. Please check all the hose attachment points when you receive it, especially the threaded hose coupling on the bottom back, mine had the hole "off center" inside; and this did create major problems. Don't want to find that after painting and last step of install (you can guess when I found it). But good fit otherwise, you will need a new foam seal for around the tank, and the fuel filter shipped with the tank was not as good as my original so I reused it. Good time to refresh some of the other hoses too.
Old 06-21-2012, 07:23 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #7 (permalink)