View Single Post
JFairman JFairman is offline
Registered User
Join Date: Jul 2006
Location: S. Florida
Posts: 7,289
Why are you installing a lousy aftermarket crankcase blowby oil mist catch can in a car that already has a much better designed one from the factory in it?

..and putting the oil drain hose from the aftermarket catch can right behind the rear tire is unbelievable.

Truth is everything you've done here with the crankcase blowby system is wrong.

Originally Posted by 930cab89 View Post
I would like to post a few pictures of my setup after replacing the OEM air filter with a K&N, just to be sure that everything is ok before starting the car.

This is my oil catch can:

I intend on routing the oil tank breather hose to the outside through an existing hole in the engine tin (once I have found another piece of hose). Shall I install the K&N filter on it on the outside or just keep the hose as it is?

Here you can see the oil catch can breather hose I have routed to the outside. Is is ok to leave it like this?

Old 07-05-2012, 06:24 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #6 (permalink)