View Single Post
962porsche 962porsche is offline
dkbautosports.com
 
962porsche's Avatar
 
Join Date: Feb 2009
Location: branford ct
Posts: 3,440
is the rust rotted right thru the panel of is it only on the surface ?
if its a rot thru then you have to cut out the area and past the rot out area about a inch and a half at the least past the rot out area . this will or should be sure you get all the rust cut out . if it only surface then i don't think it's on the inner part of the panel . but if you want to coat the inner panels like we do in my shops we coat the inside with rust-shield and a wand type sprayer . if any rust is between two or more panels the over lap you have to split the panels apart and sand blast of cut out and remove the rust . and then weld the panels back as they were . at that point we do the same thing with a wand sprayer and rust-shield between the panels . also we use weld primers between the over laping panel seams before we weld every thing back together .
Old 08-08-2012, 06:45 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)