View Single Post
Alan L Alan L is offline
Registered User
 
Alan L's Avatar
 
Join Date: Apr 2006
Location: New Zealand
Posts: 2,904
Cole - good to see you are still kicking along , in all respects.
I may not have the full grasp here - but FWIW, I added a heat shield 'tin' to my beast. I made an uber thin Aluminium sandwich with some Nomex sheet sandwiched between. I slid this between where the bumper buts to the body lip. You may be able to cut/slice/dice something like that if needed. Basically I used the same mounting bolts you will use to attach the bumper on.
All the best
Alan
__________________
83 SC, 82 930 (track) - Stock except for RarlyL8 race headers, RarlyL8 Zork, K27-7006, 22/28 T bars, 007 Fuel head, short 3&4 gears, NGK AFR, Greddy EBC (on the slippery slope), Wevo engine mounts, ERP rear camber adjust and mono balls, Tarret front monoball camber adjust, Elgin cams, 38mm ported heads, 964 IC. 380rwhp @ 0.8bar Apart from above, bone stock:-)
Old 08-16-2012, 03:22 PM
  Pelican Parts Technical Article Directory    Reply With Quote #394 (permalink)