View Single Post
Alan L Alan L is offline
Registered User
Alan L's Avatar
Join Date: Apr 2006
Location: New Zealand
Posts: 3,346
Great work Cole. Glad all is well at your end. I just cut an Aluminium sandwich to the required shape, plus a sheet of nomex, and stuck the lot together with a few pop rivets. Then marked out the mounting holes for the rear bumper, and drilled. So the rear bumper holds it tight and the end near the engine mount can be steadied by overlapping or bolting to some appropriate fitting.
All the best
83 SC, 82 930 (track) - Stock except for RarlyL8 race headers, RarlyL8 Zork, K27-7006, 22/28 T bars, 007 Fuel head, short 3&4 gears, NGK AFR, Greddy EBC (on the slippery slope), Wevo engine mounts, ERP rear camber adjust and mono balls, Tarret front monoball camber adjust, Elgin cams, 38mm ported heads, 964 IC. 380rwhp @ 0.8bar Apart from above, bone stock:-)
Old 08-17-2012, 10:03 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #397 (permalink)