View Single Post
Fishcop Fishcop is offline
Bird. It's the word...
Fishcop's Avatar
Join Date: Feb 2001
Location: Port Macquarie NSW Australia
Posts: 5,077
For straight lines a 1mm cut-off wheel; for curves the air saw is great, the gap created by both is perfect for using a Mig/Tig later to rejoin. I've also used an air "nibbler" and shears if a wider cut is acceptable, they leave a much nicer working edge but use up 3mm making their cuts.
John Forcier
Current: 68L 2.0 Hotrod - build underway
Old 08-23-2012, 04:30 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)