View Single Post
RoninLB RoninLB is offline
Registered User
Join Date: May 2001
Location: Peoples Republic of Long Beach, NY
Posts: 21,143

Originally posted by UTKarmann_Ghia
Any ideas what kindof goop I use for gluing the channel to the glass???
I did it bare from the glass to the lower rubber/channel mounting.. but it may come loose.. guys around here have used various stuff.. clean the rubber with some kind of paint thinner or alcohol.. the glass alignment is important with the install.. then keep a eyeball on it for awhile to see how it all settles out.. you may want to check if you have the newer hardened regulator spring center pin.. there are various flavors of the hard pin.. if you got power windows check out for any voltage drop at the sw, you can open them up and clean/grease them, but it can be a delicate maneuver..
Ronin LB
'77 911s 2.7
PMO E 8.5
SSI Monty
w x6
Old 03-01-2003, 07:36 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #6 (permalink)