View Single Post
Black_Hat Black_Hat is offline
Registered User
Join Date: Aug 2007
Location: Austin
Posts: 470
disscetion EZ-69

the ez-69 is glued together goes on in 2 pieces .the 1st piece has fine pins that make contact with the PCB .
there is no way to get this apart gracefully

can it be fixed ...maybe
will it ever look the same

the two PCBs are covered with a clear jelly like substance

if you look at the top right you can see a smoked component it is not mounted to the main PCB
and has small wires connecting it to the PCB they are brown and black ....the component is connected to pin 16

i take apart competitors equipment (not to reverse engineer but to see what they are doing)
and this is a bear to take apart and you run the risk of further damage doing so

I would not try to repair this item and I defiantly would never do it for a customer


Old 11-29-2012, 04:13 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)