View Single Post
Ronnie's.930 Ronnie's.930 is offline
Banned
 
Join Date: Nov 2007
Location: Rockwall, Texas
Posts: 8,760
Thanks Mark.

So I changed the relay for a new one from my spares box. No change, so I pulled the relay with the engine running and the idle was instantly smooth (but a little too low). I then put the relay back in, with engine still running, and the idle was perfect for about 30-40 seconds and then went back to low and hunting. I did this several times with the same results. This was all with the O2 sensor plugged back in . . .

I tried wiggling the relay in its socket to see if there might be a bad connection, but no change.

I wonder what is going on?

I guess next I need to see if the WUR is getting power?

Last edited by Ronnie's.930; 01-23-2013 at 02:25 PM..
Old 01-23-2013, 02:15 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)