Quote:
Originally posted by Scott Sneller
Question is can someone please advise what the 'Pin-out" or Wiring order is on the rotor cap?
Please specify relitive to the "Top" of the cap rotating "Clockwise", starting with the 1St terminal / wire after the larger (1/4") Notch on the underside.
Thanks - sorry if I got too long winded w/ the question.
|
Um, the wiring order is the same as the firing order, 162435. Is that your question?
Put the motor at TDC on #1 (there should be a little mark on the distributor about where the rotor is pointing. This is where the #1 wire goes. Then just put on 6,2,4,3,5.
If that's not what you're asking, please clarify.