View Single Post
Oheggem Oheggem is offline
Registered User
Oheggem's Avatar
Join Date: Sep 2009
Location: Norway
Posts: 413
XDI installation :)

Yay, another post.

I dropped the distributor and bought an XDi ignition kit. Trigger wheel and sensor mounted. Coils fitted to firewall. Xdi unit is to be mounted under drivers seat. Mount made.

I grounded the XDi controller unit directly to batteri and will start the search for a switched power supply tomorrow. I will drill a hole in the engine firewall just over the suspension tower for wiring and install a grommit. Too much fuzzing about using the existing holes!

I was thinking that since i took out the CDi i could use the 6 pin connector already there to steal power and tachometer (if i need that?).

Also adding a mapsensor that i can connect to one of my blocked off vacuum hoses.

Very close to getting the engine into the bay now Any help or comments much appreciated as always.
Old 03-29-2013, 11:57 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)