View Single Post
b5aar b5aar is offline
b5aar's Avatar
Join Date: May 2010
Location: up and down the east coast
Posts: 135
rocker shaft removal #1, #4

Hey guys

In the middle of cam replacement...first time... - 930 to SC. All rockers and shafts are out except for #1 and #4 exhaust. Easy tap out for #2 - 5 issues.

Not enough clearance against cam housings to tap out from back to front through bores for #1 and #4. I was able to push out #1 and #4 intakes opposite way with a little leverage using socket and shortened hex key. No problem.

#1 and #4 exhaust are tight. Any ideas...or do the the cam housings have to come off for clearance and then tap out back to front.
88 930 BnB Kinesis tial 1bar k27/29, MSD Turbokraft IC+blocks+rokr loks+ ported intake,edelweiss cams, KEP/Sachs, Verden Tool 38mm PP heads, ARP bolts/studs, twin plug for future
Old 04-13-2013, 09:05 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)