View Single Post
b5aar b5aar is offline
PorscheMoparLiterbike
 
b5aar's Avatar
 
Join Date: May 2010
Location: up and down the east coast
Posts: 135
Did it. Same way as #1 and #4 intakes. Used a spring puller to catch the inside ridge of the rocker shaft and pull....carefully....with the shaft of a screwdriver through the puller handle and levered against one of the valve cover studs. Pulled into valley between #4,#5 and #1,2 and popped out.

I wrapped the tip of the puller with shop towel for grip and minimizing damage. 2nd pic shows the orientation on #4 exhaust. (popped the shaft back in for the pic rocker was out from before)
__________________
88 930 BnB Kinesis tial 1bar k27/29, MSD Turbokraft IC+blocks+rokr loks+ ported intake,edelweiss cams, KEP/Sachs, Verden Tool 38mm PP heads, ARP bolts/studs, twin plug for future
Old 04-13-2013, 01:08 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #5 (permalink)