View Single Post
DeFreest DeFreest is offline
Registerd 930 user nut
DeFreest's Avatar
Join Date: Apr 2012
Location: NH
Posts: 256
Originally Posted by JFairman View Post
I've always wanted to do that to mine too, and a dab of white paint in the notch to make it more visible.
If I ever have both fan belts off at the same time I'll ask around for the math formula to figure out how far the notches for every 5 degrees btdc up to 40 or 50 should be from tdc and use a fine cut off wheel on a dremel tool to make the notches.

Or if I ever get a dial back timing light that would be good too.
I was going to notch mine every 5* as well. Just need the dia of the pulley at where the notches are and I can give you the dimensions. I'd do it here but since were going through another winter, or so it seems, I have chickened out working on the car in the cold as I don't want to rush anything.
Old 04-23-2013, 01:40 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #51 (permalink)