View Single Post
RarlyL8 RarlyL8 is offline
Crotchety Old Bastard
RarlyL8's Avatar
Join Date: Jan 2000
Location: Huntsville, AL
Posts: 13,614
No More Crooked Zorks!

Finally got around to implementing a change in my zork tubes that should make them fully universal. We've noticed with the myriad of different turbos and headers folks use that the zork placement is all over the map. I used the 3LDZ with stock heat exchangers as the baseline. Throw on a K27 and you are 1/2" off to the passenger's side. Throw on a set of cheap headers and lord knows where the thing is gonna point. TiAL with a V-band? Maybe an inch off.
So to remedy this we added one more point of adjustment. They now telescope or retract and move side to side. Perfect fit no-matter what setup you have.

RarlyL8 Motorsports / M&K Exhaust - 911/930 Exhaust Systems, Turbos, TiAL, CIS Mods/Rebuilds
'78 911SC Widebody, 930 engine, 915 Tranny, K27, SC Cams, RL8 Headers & GT3 Muffler. 350whp @ 0.75bar
Brian B. (256)536-9977 Service@MKExhaust Brian@RarlyL8
Old 06-15-2013, 07:38 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)