View Single Post
Ken911 Ken911 is offline
Registered User
 
Ken911's Avatar
 
Join Date: May 2005
Location: Loxahatchee, florida
Posts: 2,480
Next it was time for the intake holes these have to to be stepped at two different diameters. 42mm on the inside to match the intake ports. and 48mm on the outside for the OD of the tubing i'm using. Well the two forestner bits i had for that would have worked ok in the drill press at a slow enough speed but no way i could get it by hand.
So i drilled them as big as possible using a step drill and will have to get them opened up the rest of the way on a lathe. Hopefully i can bribe the machinist at work with beer lol.
__________________
88 turbo Guards red Targa slant nose, and yes I am a horsepower junkie, 3.4liter,7.5 to 1 JE pistons, Adjustable WUR, Imagine fuel head, 1 bar waste gate headers,allthe cis toys. Now apart to become the next EFI monster. fabbing my own intake, headers Individual throttle bodies, MS-3, pauter rods, Xtreme twin plugged heads, gt-2 evo cams cop's.
05 Cayenne S lapis blue
Old 11-24-2013, 06:59 PM
  Pelican Parts Technical Article Directory    Reply With Quote #112 (permalink)