View Single Post
quattrorunner quattrorunner is offline
Brando
 
quattrorunner's Avatar
 
Join Date: May 2006
Location: Las vegas
Posts: 5,561
Garage
Well the thing moving makes the hoses come off the TB or up pipe and the engine quits. If its held down onto the pipes and kept in place, the hose clamps dont have too much work to do other than to keep boost pressure in. With this type of sealing system, the o-ring to silicone there is less "hold" onto the pipes and TB than normal. If the IC is held down onto them well you'll be fine. Might have to do a little fab work or adjusting. Call Chris at turbokraft, he could guide you through this. He's busy so don't waste all his time but hes very nice and helpful. Good luck
__________________
Turbo powa!
1977 911s. it's cool
Old 01-10-2014, 07:29 AM
  Pelican Parts Technical Article Directory    Reply With Quote #22 (permalink)