View Single Post
Hirevtuner Hirevtuner is offline
Registered User
 
Hirevtuner's Avatar
 
Join Date: Oct 2007
Location: Calgary
Posts: 364
Quote:
Originally Posted by full quack View Post
The cable tube runs through the fender well, NOT through the interior of your car. If you look closely inside your rear drivers side fender, you will see the tube containing the cable, running along the top of the inner fender well.
No way to get to it from the interior.
You may possibly be able to get to the latch from under the car, by carefully working some slim tools through the rubber engine compartment seal, gonna be a ***** though!
Best of luck, and buy the way, a shop is not going to have any surprise tricks for this, it's just going to cost you a bunch of cash.

Mark
As Mark sugests. If that doesnt work cut the cable housing and pull the wire to open the hatch. Of course you will have to replace the cable and housing but it's open.
__________________
1981 411 rwhp, Ruf intercooler, 964 cams, Turbo Kraft injector blocks, Extrude honed intake, 7006 Turbo, Tial wastegate, RarlyL8 exhaust, MSD6al
Old 01-13-2014, 05:04 PM
  Pelican Parts Technical Article Directory    Reply With Quote #16 (permalink)