View Single Post
mooney265 mooney265 is offline
Tinkering Pays!!
mooney265's Avatar
Join Date: Sep 2008
Location: New Orleans
Posts: 1,365
You're right about the spark plug wires... both of my hoses run along the engine tin "just below" access to the wires.

I just adjusted my valves and the hoses almost limited me from removing the upper valve cover. Was able to move the hoses enough to get er done...

My high pressure switch is right about where yours is, except it's pointing straight up and the hose rides along the engine tin...
LIVN80S - - Red '79 Porsche 930 Steel Slant Nose Conversion [in 1987] w. 46k miles 3.3L; 964 Cams; K27HF @ 1.0 BAR, with Garrettson Intercooler; Rarly Zork; CIS Flowtech Fuel Head & BL-WUR.
Old 01-21-2014, 09:45 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)