View Single Post
jwasbury jwasbury is offline
beancounter
 
jwasbury's Avatar
 
Join Date: Jan 2008
Location: Weehawken, NJ
Posts: 3,179
I bought the SSI kit from Bryan some years back. It has the same exchangers as Gumba's, that terminate with vband flanges just after the merge. I believe they came that way from SSI. Bryan's part was the crossover pipe and turbo inlets, wastegate plumbing, etc. I notice that the turbo flange on my set up is also stamped as SSI, but I seem to believe Bryan's crossover was his design and welded up by his supplier, not SSI. Fred will not need to backdate oil lines if he still has the original set up on his '79. '79 models came 'backdated' from the factory.

Look closely and you can see SSI stamped into the cast (or is it forged) bit where the x-over meets the turbine inlet

__________________
Jacob
Current: 1983 911 GT4 Race Car / 1999 Spec Miata / 2000 MB SL500 / 1998 MB E300TD / 1998 BMW R1100RT / 2016 KTM Duke 690
Past: 2009 997 Turbo Cab / 1979 930
Old 02-18-2014, 04:11 PM
  Pelican Parts Technical Article Directory    Reply With Quote #4 (permalink)