View Single Post
Robbbyg Robbbyg is offline
Registered User
 
Robbbyg's Avatar
 
Join Date: Aug 2008
Posts: 1,138
Garage
Porsche Crest Its All Plugged!

Recap,
Euro 3.0 930

i want to drop running temps in summer here in oz so i bought a 84 year factory Intercooler,

To install this advice given to me from fellow pelicans was to get a 3.3 manifold and diverter valve housing,

Ive done this and installed the above bits, with which i had to rotate the throttle body which is the only non factory mod, disregarding ive removed the decel and AAR and the fuel sensor temp regulator thing that sits under the fuel head,

Ive blocked all open lines ,

Car tries to start but backfires then quits,

I know im missing something and my info given has been great to get this far with it.

here is how she is at present, any ideas thoughts as to why she will only backfire even if wrong will be greatly appreciated and tried anyway until she runs .



This pic faintly shows where ive run a hose from the diverter valve housing elbow as dont know where to put it so ive got it hanging, good or not?, you can see it behind the WG charge line
__________________
Wheels
Last row 1977 3.0 930 260hp built, still reassembling
Row 1998 996 MK1 3.4 296hp new daily driver
Old 03-08-2014, 07:59 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)