View Single Post
Robbbyg Robbbyg is offline
Registered User
 
Robbbyg's Avatar
 
Join Date: Aug 2008
Posts: 1,138
Garage
Thanks your a legend,

I dont know how i had that plugged up, i took photos but not of that as at the time i probably thought it was an easy thing to remember..sux gtting old

On the 3.3 manifold i dont have the two curved spouts like i did on the 3.0, so ill route it to the main intake port at the back middle of the manifold as that isnt being used and in currently blocked off..

will post results,,

also the metering plate slapping against the top of the rim..

I have an idea that it could be because i removed this,
I removed it as the clearance was extrmely tight due to the cold air intake, so im going to trim the height of the filter at the silicone base and put it back on see how it goes

Fingers crossed she will run today

__________________
Wheels
Last row 1977 3.0 930 260hp built, still reassembling
Row 1998 996 MK1 3.4 296hp new daily driver

Last edited by Robbbyg; 03-09-2014 at 01:57 PM..
Old 03-09-2014, 01:54 PM
  Pelican Parts Technical Article Directory    Reply With Quote #11 (permalink)