View Single Post
Ronnie's.930 Ronnie's.930 is offline
Join Date: Nov 2007
Location: Rockwall, Texas
Posts: 8,765
Rob - to the far left of the above picture you see the "double" spout - in original configuration the upward part was for the decel valve, so that should be plugged since you are not using the decel valve, but the downward curving portion is where the the diverter valve (BOV) hose should go (hose goes from the spout on the BOV endcap, snakes under the manifold, and attaches to that tube). That is how it was with your 3.0 diverter and is the same for the 3.3 that you have now. But, it looks like it would work just fine where you show that you want it to go in the pic above.
Old 03-09-2014, 07:25 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #21 (permalink)