View Single Post
Robbbyg Robbbyg is offline
Registered User
Robbbyg's Avatar
Join Date: Aug 2008
Posts: 1,138
Hi Ronnie I Think i may have found at least one major problem !!

In my hast of putting it all together, (some?) silicone got into the Fuel Head, ive been blowing it out of the lines and injectors and main head itself from every hole, valve, pipe ...stuff i used is impervious to fuel so im going to spray through everything with WD40 and then Acetone The WD will dissolve the silicone i used for gaskets and the Acetone will rinse it away with no trace... (its a plan)

I guess that would count for some if not all of the problems,

So Im going to have to give each part the going over, as ive used a bit of the stuff

Im going to try find some info on Early Euro 930's all diagrams of 77 and earlier ive found are of US models.. which makes this job a little tricky re port off csv.. not a lot around,

Anyone got info of Eary Euro conversions please post !

Last row 1977 3.0 930 260hp built, still reassembling
Row 1998 996 MK1 3.4 296hp new daily driver
Old 03-11-2014, 05:49 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #28 (permalink)