View Single Post
ruechaos ruechaos is offline
Registered User
 
ruechaos's Avatar
 
Join Date: Jul 2001
Location: Saint Louis, MO. USA
Posts: 175
Garage
Question DME and wiring harness questions (FR Wilk)

Hey Guys! I have a couple questions for you all.

I would like to know what all the different pins on the back of the DME actually goto/control. I would like to know for both the early and late 944NA Motronics, but either would be simply awesome.

I also have a late 944NA engine wiring harness. but it dosen't seem quite complete. A lot of the wires are cut (25-30) but there are a few connecters that are there (aprox. 5). I'm thinking that the 25 or so wires connect up the the fuse block in the engine compartment. There are 3 connecters that are vary similiar, and look a lot like what plugs into the AFM. Then there's a small, black, 3-prong cable that looks like the connecter to the cruise control. And to top all that off, there's a small redish box with a thin wire comming off of it (lamda/O2 sensor maybe..?) If you could help me confirm or figure out what these goto, you would have a new best friend for life!

For those of you who don't know, I'm putting an early 944 engine into a late 944S body. I've already switched the early AFM and DME to the late 944NA parts, and I have a late 944NA engine wiring harness, but it dosen't seem to be quite complete, although, as stated above.

Any and all help is greatly apreciated!

Thanks!

-Tony
Old 05-07-2003, 06:46 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)