View Single Post
Bob930slant Bob930slant is offline
Registered User
 
Bob930slant's Avatar
 
Join Date: Dec 2005
Location: Abbotsford, Canada
Posts: 36
Garage
here is my before pic of the front with no lip. I tried two options.



1) i tried modifying as lip from an SC. I found it was too deep and positioned too far back. this caused scrapping and was too low for my liking.

2) the next lip i tried was from an early VW Jetta. It positions a little higher and farther forward than the SC. This worked for me. pic of jetta lip below



the last pic shows the lip from the back side. it does not lower the overall very much and scrapping is minimal.



this lip reduced the front end lift.
__________________
81 930 Turbo RoW, Slantnose, 3.5 twin plug dual MSD 6AL ignition, MSD RPM Activated boost rdelay switch set at 4400, MSD Tach Adapter, BL Wur, 18x11 (315-30-18) and 18x8 (235-35-18), Fab speed exhaust, Innovate MTX, K&N Filter Mod., NGK BPR7EIX and DPR7EIX plugs, KEP Stage II PP with Street/Race Organic Disk., Weltmiester Swaybars, Adjustable AAR Mod, AAV Delete
Old 03-21-2014, 10:43 PM
  Pelican Parts Technical Article Directory    Reply With Quote #8 (permalink)