View Single Post
Groovie Ghoulie Groovie Ghoulie is offline
Registered User
 
Groovie Ghoulie's Avatar
 
Join Date: Jul 2010
Location: Melbourne, Florida
Posts: 433
Garage
My fronts are the same as yours, But I put bigger T-Bars and Von shocks in mine. No issues rubbing on the fronts. The rears were a different story. After the Pain of re-indexing the rears I just today installed the ER Adjustable spring plates. I brought the backs up to right around 25. The rears were at 24, and it was rubbing inside the tops of the flares bad under hard acceleration. Also be aware that at 24 rear, my camber was -2.5 to keep the toe in spec. It drove me nuts using only 80% of my tread on normal street driving. Hopefully I can get it to -1.5 or less now.

Here is the 24.5 / 24 look. no new pics of it at 25 rear (yet). But after the new alignment, I plan on getting spacers out back to fill up the gaps a little more.




Last edited by Groovie Ghoulie; 03-23-2014 at 11:58 AM..
Old 03-23-2014, 11:55 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #19 (permalink)