View Single Post
TurboKraft TurboKraft is offline
Registered User
TurboKraft's Avatar
Join Date: Mar 2005
Location: Phoenix, AZ
Posts: 2,546
The K.I.S.S. method is as outlined above, and same as in post #9's photo:
* 965 CIS elbow #930-110-382-00
* 993T diverter valve #993-110-337-51
* weld a 25mm tube on the outlet side of your intercooler

If you want to put one just off the turbocharger, weld a 1" tube to the charge pipe between the turbo and intercooler, plus a corresponding 1" tube in the fresh air tube going down to the turbocharger.

Or run two diverter valves, like we did on this setup for a high power CIS 930 with a turbo much bigger than a K27. On the mockup engine after fabrication:

Chris Carroll
TurboKraft, Inc.
Tel. 480.969.0911
email: -
Old 04-23-2014, 09:59 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #24 (permalink)