View Single Post
infraredcalvin infraredcalvin is offline
Non User
infraredcalvin's Avatar
Join Date: Sep 2007
Location: Ladera Ranch, CA
Posts: 1,275
Not so easy, for the fronts rotors need to be milled down to a smaller diameter, you'll need a 21 mm Mercedes master cylinder and an insert or lengthen brake pushrod, for the rears you need to check your mounting points on your trailing arms. If you have the mounting ears on the rear trailing arms, you'll have to face and tap them, or you have to face the brake caliper and cut mounting holes and re drill calipers for 3 inch spacing on the stock mounts.

930 rear caliper modification for 911

Contact Steve at Rennsport Systems he'll hook you up with what you need, or go with VCI. I went with facing and tapping my trailing arms and got all the parts from Rennsport sys, Steve is a great guy, has been there and done that...
Infraredcalvin - AKA Pat
'76 Turbo Carrera #311 - Factory LSD, Sport Seats
'75 914 GT clone project
'71 914 track car
Old 05-02-2014, 06:18 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)