View Single Post
RarlyL8 RarlyL8 is offline
Crotchety Old Bastard
 
RarlyL8's Avatar
 
Join Date: Jan 2000
Location: Huntsville, AL
Posts: 13,304
Garage
The ball fitting on the end of the line is what distorts. If this has happened, and it sounds like it has, you must replace the line.
The word I use to describe the torque spec is "snug". If you give it any strength at all it will over tighten. I test them by running the pumps when finished then re-tightening the loose ones.
__________________
RarlyL8 Motorsports / M&K Exhaust - 911/930 Exhaust Systems, Turbos, TiAL, CIS Mods/Rebuilds
'78 911SC Widebody, 930 engine, 915 Tranny, K27, SC Cams, RL8 Headers & GT3 Muffler. 350whp @ 0.75bar
Brian B. (256)536-9977 Service@MKExhaust Brian@RarlyL8
Old 05-06-2014, 09:06 PM
  Pelican Parts Technical Article Directory    Reply With Quote #16 (permalink)